PocketStrobeLED_top-side.png

 


Faster | Brighter | Tighter

In terms of flash rate and light intensity the Pocket Strobe LED is second to none among the portable LED strobes world-wide. Cutting edge LEDs, intelligent electronics and a high quality optical assembly assure a bright and homogeneous illumination of fast moving objects.

The PocketStrobe LED fits in the palm of your hand, is robust and waterproof. Ideal for around the paper machine. 


 

Applications

The number of applications in the paper industry is almost countless:

- Checking turbulence and stock jumping on the wire
- The jet impingement angle and forming table dewatering
- Dewatering pulsations, causing mass variations
- Inspecting trim nozzles and HP showers on air-enclosures
- Checking sheet drop-offs on the pickup felt

And so on…


Fill in the form and download the brochure

A unique feature of the PocketStrobe LED is that the flash duration can be set independently from the flash frequency. 

The shorter the flash duration, the less distance is traveled by the viewed object and the sharper the image will get. However, the longer the flash duration, the more the object is illuminated. The choice is up to you!

FAQ's

Hier komt een pakkende, StoryBrand-approved zin te staan.

The number of applications in the paper industry is almost countless. These are just a few examples:

- Checking turbulence and stock jumping on the wire

- The jet impingement angle and forming table dewatering

- Dewatering pulsations, causing mass variations

- Inspecting trim nozzles and HP showers on air-enclosures

- Checking sheet drop-offs on the pickup felt

Approximately 5 hours at 6000 Flashes Per Minute (dependent on the settings). You can use standard disposable alkaline, AA-size batteries.

The Flash Rate range varies from 30 to 300 000 FPM (Flashes Per Minute).

Suppose, you want to have 2 light flashes per second. Then the frequency is 2 Hz or FPS (Flasher Per Second). In that case a total cycle (light off – light on – light off) lasts 500 ms, because 2 cycles make a 1000 ms (1 second).

The flash duration is the time period (in milliseconds) in which the light is on. The duration is limited by technology (the LED need some time to start emitting light) and the flash frequency (because at 2 FPS, the flash duration must be < 500 ms).

With the PocketStrobe LED you can set both the frequency and the duration. The shorter the flash duration, the less distance is traveled by the viewed object and the sharper the image will get. However, the longer the flash duration, the more the object is illuminated.

The choice is yours!

 

Please note that we do not sell the PowerStrobe anymore.

The difference is the size and the reach of the light beam: the PowerStrobe could be used from a far distance, as it had a narrow beam of light. Our PocketStrobe LED on the other hand, gives a wider, diverging light beam and because of that reaches less far – approximately 1 m | 3 ft.

 

SpecificationsPocketStrobe LED
Max. light output4800 lux @ 0.3m (1 ft) distance with 100% intensity, 6000 FPM
Flash rate range30 - 300 000 FPM (Flashes Per Minute)
Flash colorApprox. 6500K
Protection classIP68
Dimensions191 x 82 x 60 mm | 7.5 x 3.2 x 2.4"
Weight0.4 kg | 0.9 lbs (including batteries)
Batteries3x AA-size disposable batteries, rechargeable NiMH batteries are optional
Battery lifeApprox. 5 hours @ 6000 FPM (dependent on settings)
Available settings and functionsFlash duration (shorter = sharper image, but less illumination)
 Flash frequency and duration are set independently from each other
 Double or halve the current flash rate with just 1 button


Get your PocketStrobe LED Quote

Get your quote instantly by adding it to your shopping basket and pressing the Request Quote button, or buy directly in our ONLINE STORE.

Any questions? Just reach out and our sales team will contact you shortly.